Diameter: 1.75mm

Recommended Extrusion Temperature Range: 280-300

Recommended Bed Temperatures: Suggested: 80C-90C on PEI - Sticks Very well, use glue/Nano to discourage complete bonding

Volumetric Flow Rates: 50mm3/s +

How do I dry my filament properly?

Please reference the table below for recommended drying temps and durations on various Fusion Filaments material types.

NOTE: Not all drying devices are built equally, failure to follow these temperatures could result in a damaged spool

Resin:BPET

*Note: Please ensure compatibility with your printer. Material needs to be kept dry for best performance. This material is BPET, NOT PETG
We recommend drying your filament once delivered. HTPET+ is extremely hydroscopic and will absorb moisture through the vacuum bags even when perfectly sealed.
Why should I use HTPET+ ?
HTPET+ is a PETE polymer, the same plastic used to make soda pop bottles.
It has a glass transition temperature of 82c.
It is a non-warping resin.
It is annealable same as most PLA's.
It has similar heat resistance to ABS without annealing at 87c.
It doesn't have the same issues as PETG does. It doesn't glob, it can print at 400mm/s or higher speeds.