Skip to product information
1 of 6

Fusion Filaments

HTPET - Radiated Fog

Regular price
$34.99
Sale price
$34.99
  • Hurry, only 4 items left in stock!
A darkened clear sparkly filament for using in the most demanding situations.

Product Details

Printing Information

Diameter: 1.75mm

Recommended Extrusion Temperature Range: 280-300

Recommended Bed Temperatures: Suggested: 80C-90C on PEI - Sticks Very well, use glue/Nano to discourage complete bonding

Volumetric Flow Rates: 50mm3/s +

Drying Information

How do I dry my filament properly?

Please reference the table below for recommended drying temps and durations on various Fusion Filaments material types.

NOTE: Not all drying devices are built equally, failure to follow these temperatures could result in a damaged spool

 Resin Spool Type Temp (C / F) Drying Time
HTPLA+ Refill Spool 46 / 115 12 hours
HTPLA+ Injection Spool 55 / 131 6 hours
PLA Refill Spool 46 / 115 12 hours
PLA Injection Spool 55 / 131 6 hours
PETG Refill Spool 46 / 115 16 hours
PETG Injection Spool 55 / 131 12 hours
HTPET+ Injection Spool 74 / 165 12 hours
ABS Injection Spool 74 / 165 12 hours
Polycarbonate Injection Spool 74 / 165 16 hours

Material Information

Resin:BPET

*Note: Please ensure compatibility with your printer. Material needs to be kept dry for best performance. This material is BPET, NOT PETG
We recommend drying your filament once delivered. HTPET+ is extremely hydroscopic and will absorb moisture through the vacuum bags even when perfectly sealed.
Why should I use HTPET+ ?
HTPET+ is a PETE polymer, the same plastic used to make soda pop bottles.
It has a glass transition temperature of 82c.
It is a non-warping resin.
It is annealable same as most PLA's.
It has similar heat resistance to ABS without annealing at 87c.
It doesn't have the same issues as PETG does. It doesn't glob, it can print at 400mm/s or higher speeds.