1 4

Fusion Filaments

HTPLA - Tritium Green

$30.49
$30.49
  • Hurry, only 3 items left in stock!
More information View images
A green with lots of sparkle!

Product Details

Printing Information

Diameter: 1.75mm

Recommended Extrusion Temperature Range: 220-245C

Recommended Bed Temperatures: Suggested: 60C on PEI - Range:50 - 75c (with PEI / Ultem, or Glass with Hairspray or Glue Stick)

Volumetric Flow Rates: 70mm3/s +

Drying Information

How do I dry my filament properly?

Please reference the table below for recommended drying temps and durations on various Fusion Filaments material types.

NOTE: Not all drying devices are built equally, failure to follow these temperatures could result in a damaged spool

 Resin Spool Type Temp (C / F) Drying Time
HTPLA+ Refill Spool 46 / 115 12 hours
HTPLA+ Injection Spool 55 / 131 6 hours
PLA Refill Spool 46 / 115 12 hours
PLA Injection Spool 55 / 131 6 hours
PETG Refill Spool 46 / 115 16 hours
PETG Injection Spool 55 / 131 12 hours
HTPET+ Injection Spool 74 / 165 12 hours
ABS Injection Spool 74 / 165 12 hours
Polycarbonate Injection Spool 74 / 165 16 hours

Material Information

Resin:3D870